Whether your clutch is slipping, you have noticed a high bite point, or you are struggling to select gears, KMRA provides professional clutch repairs and replacement for all vehicle makes and models in Margaret River.
Why Choose KMRA for Clutch Repairs?
KMRA is Margaret River’s trusted local workshop for clutch repairs and replacement. From diagnosing a slipping clutch to completing a full clutch kit replacement, our technicians handle every job accurately the first time.
- Licensed and experienced technicians
- All vehicle makes and models serviced
- Quality parts from trusted suppliers
- Transparent pricing and advice
- Most clutch jobs completed within a day
Clutch Services We Offer
From a clutch cable adjustment to a full flywheel replacement, we cover the complete range of clutch work. Every job starts with a proper diagnosis so you know exactly what is needed before any work begins.
- Full clutch kit replacement (pressure plate, disc, release bearing)
- Hydraulic clutch master and slave cylinder replacement
- Clutch cable repairs and adjustment
- Release bearing replacement
- Flywheel replacement
- Dual-mass flywheel replacement
- Clutch fault diagnosis
Clutch Replacement in Margaret River
A clutch replacement is one of the more involved jobs on a vehicle — but when it is done properly, the results are immediate and long-lasting. A full clutch kit typically includes the clutch disc, pressure plate, and release bearing, replaced as a set to ensure consistent performance and the longest possible service life.
At KMRA, we carry out full clutch kit replacements across all makes and models. We also inspect the flywheel at the time of replacement, since a worn or scored flywheel will shorten the life of a new clutch kit if it is not addressed at the same time.
Most clutch replacements are completed within a day. We will give you a clear timeframe and a full cost breakdown before any work begins.
Hydraulic and Cable Clutch Repairs
Not every clutch fault requires a full kit replacement. If the clutch pedal feels spongy, unusually heavy, or is not returning properly, the issue is often in the hydraulic or cable system rather than the clutch itself.
Hydraulic clutch faults typically involve the master cylinder, slave cylinder, or a leak in the hydraulic line. Cable clutch faults are often a stretched, frayed, or misadjusted cable. We identify which system your vehicle uses and diagnose the fault accurately before recommending any work.
What we diagnose and repair:
- Master cylinder faults
- Slave cylinder faults
- Clutch hydraulic line leaks
- Clutch cable wear, fraying, and breakage
- Cable adjustment and replacement
- Clutch pedal return issues
Flywheel Inspection and Replacement
The flywheel works directly with the clutch disc — if it is worn, scored, or cracked, even a brand new clutch kit will not perform as it should. We always inspect the flywheel when carrying out a clutch replacement and advise whether it needs attention.
Many modern vehicles use a dual-mass flywheel (DMF), which absorbs vibration between the engine and gearbox. Dual-mass flywheels are not serviceable — when they fail, they need to be replaced. The symptoms are distinctive and should not be ignored.
Signs of flywheel wear or dual-mass flywheel failure:
- Clutch juddering or shuddering on takeoff
- Rattling or rumbling at idle or low engine revs
- A new clutch kit wearing out faster than expected
- Vibration felt through the clutch pedal
Signs Your Clutch Needs Attention
Clutch Slipping
The engine revs rise when you accelerate but the vehicle does not speed up to match. Most noticeable when pulling away from a stop or climbing under load. Usually means the clutch disc is worn and replacement is needed.
High or Rising Bite Point
If the clutch engages very high in the pedal travel — or has moved noticeably higher over recent months — the disc is wearing thin. Catching this early can prevent flywheel damage.
Clutch Juddering or Shuddering on Takeoff
A shuddering sensation when releasing the clutch from a standstill often points to a worn clutch disc, a contaminated disc from an oil or fluid leak, or a failing dual-mass flywheel.
Difficulty Selecting Gears
If gears are hard to engage or the vehicle crunches into gear, the clutch may not be fully releasing. This can be a hydraulic fault, a cable issue, or a worn clutch that is not disengaging properly.
Burning Smell When Driving
A burning smell — particularly in stop-start traffic or on hills — is a strong sign of clutch slip. The friction material is overheating and wearing faster the longer it is left.
Noise When Pressing the Clutch Pedal
A squealing or rattling sound when the pedal is pressed often indicates a worn release bearing. It can be resolved with a bearing replacement, but if left too long it tends to cause wider damage to the clutch assembly.
Frequently Asked Questions
How do I know if I need a clutch replacement or just a repair?
Not every clutch fault requires a full replacement. If the issue is in the hydraulic or cable system — a spongy pedal, a heavy pedal, or a pedal not returning properly — it may only need a component repair. If the clutch itself is slipping, has a very high bite point, or is juddering on takeoff, replacement is usually the right call. We diagnose first and advise before any work begins.
How long does a clutch replacement take?
Most clutch replacements are completed within a day. More complex jobs — such as those involving dual-mass flywheel replacement or difficult gearbox access on certain vehicles — may take longer. We give you a clear timeframe when you book.
Can I keep driving with a slipping clutch?
It is possible in the short term, but not advisable. A slipping clutch gets worse with use, not better. The longer it is left, the more likely it is to cause flywheel damage, which adds significantly to the repair cost. If you notice slipping, book it in as soon as you can.
Do you work on all vehicle makes and models?
Yes. We carry out clutch repairs and replacement across all makes and models including Toyota, Ford, Holden, Mazda, Mitsubishi, Hyundai, Isuzu, Volkswagen, and most other passenger, 4WD, and dual-cab vehicles.
Book Your Clutch Repair in Margaret River
Whether you know exactly what needs fixing or you are not sure what is causing the problem, our team will give you a straight answer and a clear quote before any work begins.
Call Us Now: (08) 9757 3399
Email: reception@kmra.com.au
Visit Us: Unit 3 / 29 Auger Way, Margaret River WA 6285





